PLANET WGSW-52040 - Manual (Page 243)

14-12
Function:
Configure the specified port to send LLDP-MED Capability TLV. The no command disables the capability.
Parameter:
None.
Default:
The function is disabled for sending LLDP-MED Capability TLV.
Command Mode:
Port mode
Usage Guide:
After configuring this command, if the port is able to send LLDP-MED TLV, the sent LLDP packets with LLDP-MED
Capability TLV. However, LLDP packets sent by the port without LLDP-MED Capability TLV after the switch
configured the corresponding no command. Note: LLDP-MED Capability TLV is the important LLDP-MED TLV, if do
not configure the port to send LLDP-MED Capability TLV firstly, other LLDP-MED TLV will not be sent.
Example:
Port 19 enables the function for sending LLDP-MED Capability TLV.
Switch(Config-If-Ethernet1/19)# lldp transmit med tlv capability
14.8 lldp transmit med tlv extendPoe
Command:
lldp transmit med tlv extendPoe
no lldp transmit med tlv extendPoe
Function:
Configure the specified port to send LLDP-MED Extended Power-Via-MDI TLV. The no command disables the
capability.
Parameter:
None.
Default:
The function is disabled for sending LLDP-MED Extended Power-Via-MDI TLV.