PLANET WGSW-52040 - Manual (Page 876)

65-416
Turn on the on-off for showing the receiving packets.
Switch#debug driver receive
65.5 show cpu-rx protocol
Command:
show cpu-rx protocol [ ]
Function:
Show the statistics of the CPU received packets of the specified protocol type.
Parameter:
<protocol- type> is the protocol type of the packets, if do not input parameters, show all statistic packets.
Command Mode:
Admin and configuration mode
Default:
None.
Usage Guide:
This command is used to debug, it is supposed to be used with the help of the technical support.
Example:
Show the statistics of CPU receiving ARP packets.
Switch#show cpu-rx protocol arp
Type Rate-limit TotPkts CurState
arp 500 3 allowed