PLANET WGSW-52040 - Manual (Page 267)

17-36
Examples:
Specify the name of VLAN100 as TestVlan.
Switch(Config-Vlan100)#name TestVlan
17.1.14 private-vlan
Command:
private-vlan {primary | isolated | community}
no private-vlan
Function:
Configure current VLAN to Private VLAN. The no command cancels the Private VLAN configuration.
Parameter:
primary set current VLAN to Primary VLAN, isolated set current VLAN to Isolated VLAN, community set current
VLAN to Community VLAN.
Command Mode:
VLAN mode
Default:
Private VLAN is not configured by default.
Usage Guide:
There are three Private VLANs: Primary VLAN, Isolated VLAN and Community VLAN. Ports in Primary there are
three Private VLANs: Primary VLAN, Isolated VLAN and Community VLAN can communicate with ports of Isolated
VLAN and Community VLAN related to this Primary VLAN; Ports in Isolated VLAN are isolated between each other
and only communicate with ports in Primary VLAN they related to; ports in Community VLAN can communicate both
with each other and with Primary VLAN ports they related to; there is no communication between ports in Community
VLAN and port in Isolated VLAN.
Only VLANs containing empty Ethernet ports can be set to Private VLAN, and only the Private VLANs configured with
associated private relationships can set the Access Ethernet ports their member ports. Normal VLAN will clear its
Ethernet ports when set to Private VLAN.
It is to be noted Private VLAN messages will not be transmitted by GVRP.
Example:
Set VLAN100, 200, 300 to private vlans, with respectively primary, Isolated, Community types.