PLANET WGSW-52040 - Manual (Page 529)

33-69
DHCP Snooping binding is disabled by default.
Usage Guide:
When the function is enabled, it will record the binding information allocated by DHCP Server of all trusted ports.
Only after the DHCP SNOOPING function is enabled, the binding function can be enabled.
Example:
Enable the DHCP Snooping binding funciton.
switch(config)#ip dhcp snooping binding enable
Relative Command: ip dhcp snooping enable
33.11 ip dhcp snooping binding dot1x
Command:
ip dhcp snooping binding dot1x
no ip dhcp snooping binding dot1x
Function:
Enable the DHCP Snooping binding DOT1X funciton.
Parameters:
None
Command Mode:
Port mode
Default Settings:
By default, the binding DOT1X funciton is disabled on all ports.
Usage Guide:
When this function is enabled, DHCP SNOOPING will notify the DOT1X module about the captured bindng
information as a DOT1X controlled user. This command is mutually exclusive to”ip dhcp snooping binding
user-contro“command.
Only after the DHCP SNOOPING binding function is enabled, the binding dot1x function can be set.
Example:
Enable the binding DOT1X funciton on port ethernet1/1.