PLANET WGSW-52040 - Manual (Page 703)

47-243
Chapter 47 Commands for MAB
47.1 authentication mab
Command:
authentication mab {radius | none}
no authentication mab
Function:
Configure the authentication mode and priority of MAC address authentication, the no command restores the default
authentication mode.
Parameters:
radius means RADIUS authentication mode, none means the authentication is needless.
Default:
Using RADIUS authentication mode.
Command Mode:
Global mode
Usage Guide:
none option is used to the fleeing function of MAC address authentication. If all configured RADIUS servers don’t
respond, switch will adopt none authentication mode to allow that MAC address authentication users access the
network directly.
Example:
Configure the fleeing function of MAC address authentication.
Switch(config)#authentication mab radius none
47.2 clear mac-authentication-bypass binding
Command:
clear mac-authentication-bypass binding {mac WORD | interface (ethernet IFNAME | IFNAME) | all}
Function: