PLANET WGSW-52040 - Manual (Page 265)

17-34
17.1.11 gvrp (Port)
Command:
gvrp
no gvrp
Function:
Enable/disable GVRP function on port. Notice: although GVRP can be enabled on port when GVRP is not enabled
globally, it will not take effect until global GVRP is enabled.
Parameters:
None
Command Mode:
Port mode
Default:
Disabled
Usage Guide:
GVRP function can only be enabled on trunk and hybrid ports, and enabling GVRP will return an error on access port.
After GVRP enabled on port, this port will be added to GVRP (i.e. adding corresponding state machine to GVRP of
the port).
Example:
Enable GVRP of port.
Switch(config-if-ethernet1/1)#gvrp
17.1.12 no garp timer
Command:
no garp timer (join | leave | leaveall)
Function:
Restore garp join | leave | leaveAll timer to the default value.
Parameters:
join, join timer