PLANET WGSW-52040 - Manual (Page 407)

23-18
UDP statistics: UDP packet statistics.
23.2.18 show ipv6 interface
Command:
show ipv6 interface {brief|}
Function:
Show interface IPv6 parameters.
Parameter:
Parameter brief is the brief summarization of IPv6 status and configuration, and parameter interface-name is Layer 3
interface name.
Default:
None
Command Mode:
Admin and Configuration Mode
Usage Guide:
If only brief is specified, then information of all L3 is displayed, and you can also specify a specific Layer 3 interface.
Example:
Switch#show ipv6 interface Vlan1
Vlan1 is up, line protocol is up, dev index is 2004
Device flag 0x1203(UP BROADCAST ALLMULTI MULTICAST)
IPv6 is enabled
Link-local address(es):
fe80::203:fff:fe00:10 PERMANENT
Global unicast address(es):
3001::1 subnet is 3001::1/64 PERMANENT
Joined group address(es):
ff02::1
ff02::16
ff02::2
ff02::5