PLANET WGSW-52040 - Manual (Page 604)

38-144
access-list {deny|permit}{any-source-mac| {host-source-mac }|{
}}{any-destination-mac| {host-destination-mac }|{ }}tcp
{{ }|any-source| {host-source }}[s-port{ | range
}] {{ > } | any-destination | {host-destination
}} [d-port { | range }] [ack+fin+psh+rst+urg+syn]
[precedence ] [tos ] [time-range ]
access-list {deny|permit}{any-source-mac| {host-source-mac }|{ <smac>
}}{any-destination-mac| {host-destination-mac }|{ }}udp
{{ }|any-source| {host-source }}[s-port{ | range
}] {{ > > }|any-destination| {host-destination
}}[d-port{ | range }] [precedence
] [tos ][time-range ]
access-list {deny|permit}{any-source-mac| {host-source-mac }|{ <smac>
}} {any-destination-mac|{host-destination-mac }|{ }}
{eigrp|gre|igrp|ip|ipinip|ospf|{ }} {{ }|any-source|{host-source
}} {{ }|any-destination| {host-destination
}} [precedence > ] [tos > ][time-range ]
Functions:
Define an extended numeric MAC-IP ACL rule, no command deletes a extended numeric MAC-IP ACL access-list
rule.
Parameters:
num access-list serial No. this is a decimal’s No. from 3100-3299; deny if rules are matching, deny to access;
permit if rules are matching, permit to access; any-source-mac: any source MAC address; any-destination-mac:
any destination MAC address; host_smac , smac: source MAC address; smac-mask: mask (reverse mask) of
source MAC address ; host_dmac , dmas destination MAC address; dmac-mask mask (reverse mask) of
destination MAC address; protocol No. of name or IP protocol. It can be a key word: eigrp, gre, icmp, igmp, igrp, ip,
ipinip, ospf, tcp, or udp, or an integer from 0-255 of list No. of IP address. Use key word ‘ip’ to match all Internet
protocols (including ICMP, TCP, AND UDP) list; source-host-ip, source No. of source network or source host of
packet delivery. Numbers of 32-bit binary system with dotted decimal notation expression; host: means the address
is the IP address of source host, otherwise the IP address of network; source-wildcard: reverse of source IP.
Numbers of 32-bit binary system expressed by decimal’s numbers with four-point separated, reverse mask;
destination-host-ip, destination No. of destination network or host to which packets are delivered. Numbers of
32-bit binary system with dotted decimal notation expression; host: means the address is the that the destination
host address, otherwise the network IP address; destination-wildcard: mask of destination. I Numbers of 32-bit
binary system expressed by decimal’s numbers with four-point separated, reverse mask; s-port(optional): means
the need to match TCP/UDP source port; port1(optional): value of TCP/UDP source interface No., Interface No. is
an integer from 0-65535; d-port(optional): means need to match TCP/UDP destination interface; <sPortMin>, the