PLANET WGSW-52040 - Manual (Page 282)

17-51
17.1.31 switchport interface
Command:
switchport interface [ethernet | portchannel] []
no switchport interface [ethernet | portchannel] []
Function:
Specify Ethernet port to VLAN; the no command deletes one or one set of ports from the specified VLAN.
Parameter:
ethernet is the Ethernet port to be added. portchannel means that the port to be added is a link-aggregation port.
interface-name port name, such as e1/1. If this option is selected, ethernet or portchannel should not be.
interface-list is the port list to be added or deleted, “;” and “-” are supported, for example: ethernet1/1;3;4-7;8.
Command mode:
VLAN Mode.
Default:
A newly created VLAN contains no port by default.
Usage Guide:
Access ports are normal ports and can join a VLAN, but a port can only join one VLAN for a time.
Example:
Assign Ethernet port 1，3，4-7，8 of VLAN100.
Switch(Config-Vlan100)#switchport interface ethernet 1/1;3;4-7;8
17.1.32 switchport mode
Command:
switchport mode {trunk | access | hybrid}
Function:
Set the port in access mode, trunk mode or hybrid mode.
Parameter:
trunk means the port allows traffic of multiple VLAN; access indicates the port belongs to one VLAN only; hybrid