PLANET WGSW-52040 - Manual (Page 583)

36-123
Function:
Enable the MLD Snooping function on the switch; the “no ipv6 mld snooping” command disables MLD Snooping.
Command Mode:
Global Mode
Default:
MLD Snooping disabled on the switch by default
Usage Guide:
Enable global MLD Snooping on the switch, namely allow every VLAN to be configured with MLD Snooping; the “no”
form of this command will disable MLD Snooping on all the VLANs as well as the global MLD snooping
Example:
Enable MLD Snooping under global mode.
Switch (config)#ipv6 mld snooping
36.1.5 ipv6 mld snooping vlan
Command:
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Function:
Enable MLD Snooping on specified VLAN; the “no” form of this command disables MLD Snooping on specified
VLAN.
Parameter:
is the id number of the VLAN, with a valid range of <1-4094>.
Command Mode:
Global Mode
Default:
MLD Snooping disabled on VLAN by default
Usage Guide: