3 show port-security address, 3 show port-security address -82 – PLANET WGSW-52040 User Manual
Page 313

18-82
Total Addresses in System:2
Displayed information
Explanation
Security Port
Is port enabled as a secure port.
MaxSecurityAddr
The maximum secure MAC address number set for the security port.
CurrentAddr
The current secure MAC address number of the security port.
Security Action
The violation mode of the port configuration.
Total Addresses in System
The current secure MAC address number of the system.
Max Addresses limit in System
The maximum secure MAC address number of the system.
18.2.3 show port-security address
Command:
show port-security address [interface
Function:
Display the secure MAC addresses of the port.
Command mode:
Admin and Configuration Mode.
Parameter:
Usage Guide:
This command displays the secure port MAC address information, if no port is specified, secure MAC addresses of
all ports are displayed. The following is an example:
Switch#show port-security address interface ethernet 1/3
Security Mac Address Table
--------------------------------------------------------------------------------------------------
Vlan Mac Address Type Ports
1 0000.0000.1111 SecureConfigured Ethernet1/1
--------------------------------------------------------------------------------------------------
Total Addresses: 1
Displayed information
Explanation