PLANET WGSW-52040 - Manual (Page 400)

23-11
Directly Connected Routes 0
Static Routes 1
OSPF 110
RIP 120
IBGP 200
EBGP 20
At the case of no chaging the distance value of all kinds of routes, the priority of directly connected routes is the
highest, the static routes, EBGP, OSPF, RIP and IBGP are followed.
Example:
1. Add a static route.
Switch(config)#ip route 1.1.1.0 255.255.255.0 2.1.1.1
2. Add the default route.
Switch(config)#ip route 0.0.0.0 0.0.0.0 2.2.2.1
23.2.11 ipv6 address
Command:
ipv6 address [eui-64]
no ipv6 address [eui-64]
Function:
Configure aggregately global unicast address, site-local address and link-local address for the interface.
Parameter:
Parameter <ipv6-address> is the prefix of IPv6 address, parameter <prefix-length> is the prefix length of IPv6
address, which is between 3-128, eui-64 means IPv6 address is generated automatically based on eui64 interface
identifier of the interface.
Command Mode:
Interface Configuration Mode.
Default:
None.
Usage Guide: