PLANET WGSW-52040 - Manual (Page 292)

17-61
17.3 Commands for Dynamic VLAN Configuration
17.3.1 dynamic-vlan mac-vlan prefer
Command:
dynamic-vlan mac-vlan prefer
Function:
Set the MAC-based VLAN preferred.
Parameter:
None.
Command Mode:
Global Mode.
Default:
MAC-based VLAN is preferred by default.
Usage Guide:
Configure the preference of dynamic-vlan on switch. The default priority sequence is MAC-based VLAN 、
IP-subnet-based VLAN、Protocol-based VLAN, namely the preferred order when several dynamic VLAN is available.
After the IP-subnet-based VLAN is set to be preferred and the user wish to restore to preferring the MAC-based
VLAN, please use this command.
Example:
Set the MAC-based VLAN preferred.
Switch#config
Switch(config)#dynamic-vlan mac-vlan prefer
17.3.2 dynamic-vlan subnet-vlan prefer
Command:
dynamic-vlan subnet-vlan prefer
Function:
Set the IP-subnet-based VLAN preferred.