Metrohm viva 1.1 (ProLab) - Manual (Page 984)

8.4 Manual control - Functions
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
972 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Work position for
If this option is selected, the current lift position is assigned to the work
position of the tower or a special beaker or to an external position of the
robotic arm.
Selection Tower | Special beaker 1 - Special beaker 16 |
External 1 - External 4
Default value Tower
Rinse position for
If this option is selected, the current lift position is assigned to the rinse
position of the tower.
Selection Tower | External positions
Default value Tower
Shift position for
If this option is selected, the current lift position is assigned to the shift
position of the tower.
Selection Tower
Default value Tower
Special position for
If this option is selected, the current lift position is assigned to the special
position of the tower.
Selection Tower
Default value Tower
Swing position
If this option is selected, the current lift position is assigned to the swing
position of the robotic arm.
Selection External positions
Default value External positions
[Assign]
Triggers assignment. During the assignment the cursor is displayed as
hourglass.
Robotic arm position
Assign the current rack position to a specific external robotic arm position.
Current position
Shows the current position of the robotic arm in °.