Metrohm viva 1.1 (ProLab) - Manual (Page 421)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 409
￭ MOVE
Moves to a rack position or an external position.
￭ PORT
Changing the port position on a multi-port valve.
￭ PREP
Preparing an exchange or dosing unit.
￭ PUMP
Switching the connected or built-in pumps on/off.
￭ RACK
Initializing the rack attached.
￭ RECEIVE
Waiting for event or status messages.
￭ REQUEST
Scans sample data.
￭ RLS DEV
Releasing an instrument for use in other methods that run in parallel.
￭ RLS DOS
Releasing a dosing device for use in other methods that run in parallel.
￭ SCAN
Scanning remote input lines.
￭ SEND
Sending event messages.
￭ SERIES END
Start command for the series end track.
￭ SERIES START
Start command for the series start track.
￭ SEQUENCE
Combines several commands to one command.
￭ SET TOTAL VOLUME
Entry of the current total volume in the measuring vessel.
￭ START
Start command for the main track.
￭ STEPPING MOTOR
Standard addition with manual addition of the standard addition solu-
tion.
￭ STIR
Controls a connected stirrer.
￭ SWING
Swings the robotic arm (only with Swing Head).
￭ TRACK
Start command for the normal track.
￭ TRANSFER
Data transfer via RS-232 to external devices or programs.
￭ VA TRACK
Start command for VA track.