Metrohm viva 1.1 (ProLab) - Manual (Page 656)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
644 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
5.5.2.11.4.2 CP - General/Hardware
Tab: Method ▶ CP ▶ Properties... ▶ General/Hardware
Command name
Name of the command.
Entry 25 characters
Device
Device name
Selection of a device from those available in the device table. Only devices
with which the command can be executed are available.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Device type field can no longer be edited
and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection 894 Professional CVS
Default value 894 Professional CVS
Sensors/Electrodes
Working electrode
Selection of an electrode of the Working electrode type from the elec-
trodes of the RDE type present in the electrode table.
Selection RDE | 'Electrode name'
Default value RDE
RDE
Standard electrode of the RDE type, which cannot be deleted.
'Electrode name'
Electrode of the RDE type from the electrode table.
Sensor type
Shows the type of working electrode (RDE).