Metrohm viva 1.1 (ProLab) - Manual (Page 479)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 467
Dosing
Input range 0.00000 - 99,999.9 mL
Default value 10.0000 mL
Aspirate
Input range 0.00000 - 50.0 mL
Default value 10.0000 mL
Rate
Speed with which the functions Dosing, Fill, Aspirate, Eject to stop,
Eject to end volume and Exchange position are carried out. The max-
imum speed depends on the cylinder volume of the dosing unit used. The
aspiration and expulsion of the sample should take place at a speed of <
10 mL/min.
Input range 0.01 - 166.00 mL/min
Selection maximum
Default value maximum
CAUTION
The maximum permitted dosing rate of 4 mL/min may not be exceeded
for capillaries with a diameter < 1 mm.
5.5.2.4.7 PREP
5.5.2.4.7.1 PREP - Overview
Dialog window: Method ▶ PREP ▶ Properties... ▶ PREP - 'Command name'
Command for rinsing the cylinder and tubings of a dosing unit.
Instruments
This command can be executed with the following instruments:
Voltammetry: 894
Dosing Interface: 846
Sample changer: 814, 815, 858, 919
Photometer: 089
Appearance
The command has the following appearance: