Metrohm viva 1.1 (ProLab) - Manual (Page 444)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
432 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection 814 USB Sample Processor | 815 Robotic USB
Sample Processor XL | 858.0010 Professional
Sample Processor | 858.0020 Professional
Sample Processor | 858.0030 Professional
Sample Processor | 919.0020 IC Autosampler
plus
Default value 858.0020 Professional Sample Processor
Target
Tower
Selection of the tower on the sample changer at which the robotic arm is
to be moved to the required position.
Selection 1 | 2
Default value 1
Swing
Selecting the target position for the robotic arm.
Selection External position | Maximum angle | Relative
angle
Default value External position
External position
Swinging to one of the 4 external positions available for each tower.
They are defined in the tower properties of the Sample Processor.
Maximum angle
Swinging to the maximum permissible outward angle (see Chapter
7.3.8, page 859).
Relative angle
Swinging by the specified swing angle relative to the current position.
This function can be used, for example, to remove vial caps automati-
cally.
Number
Indicates the number of the external position which is to be swung to.
This parameter is visible only when Swing = External position.
Input range 1 - 4
Default value 1