Metrohm viva 1.1 (ProLab) - Manual (Page 309)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 297
Var
Variation number.
Rep
Replication number.
Peak potential
Peak potential determined.
Area
Peak area determined (for Evaluation quantity = Area).
Height
Peak height determined (for Evaluation quantity = Height).
Used
on | off (Default value: on)
Shows whether a calibration point is to be used for the calculation of the
calibration curve or not.
Context-sensitive menu items for table
The table cannot be edited directly but only via the following context-sen-
sitive menu items:
On The check box in the Used column for the selected calibration point is activated.
Off The check box in the Used column for the selected calibration point is deactiva-
ted.
All on All check boxes in the Used column are activated.
All off All check boxes in the Used column are deactivated.
Invert selection The settings in the Used column for the selected calibration points are inverted.
Save selection The settings in the Used column for the selected measurement curves are
saved.
Buttons
Selection on
The marking of the calibration points selected in the table is activated.
Selection off
The marking of the calibration points selected in the table is deactivated.