Metrohm viva 1.1 (ProLab) - Manual (Page 424)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
412 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
NOTE
A maximum of 10 calls can be entered.
[Properties]
Opens the Call - 'Call text' dialog window to edit the call selected in the
table (see Chapter 5.5.2.2.2.3, page 412).
[Delete]
Deletes the selected call.
5.5.2.2.2.3 CALL - Call
Dialog window: Method ▶ CALL ▶ Properties... ▶ [New]
Call text
Freely editable text for the designation of the call; the text is displayed in
the command depiction.
Entry 50 characters
Default value 'empty'
Track name
Selection of the track to be called up. All of the normal tracks available in
the method (with the exception of the main track) are displayed.
Selection 'Track name' | 'empty'
Default value 'empty'
Conditions
Sample type
on | off (Default value: off)
Selection of sample type for calling the track. If this check box is activated,
then the call is not carried out unless the sample type defined here
matches the sample type specified in the Run window for the sample
data.
Selection Sample | Standard | Intercept
Default value Sample