Metrohm viva 1.1 (ProLab) - Manual (Page 616)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
604 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Record message
on | off (Default value: off)
If this check box is activated, then the message defined in the text field
will be documented in the determination.
Message by e-mail
on | off (Default value: off)
If this check box is activated, then the message defined in the text field
will be sent to the address defined under [E-mail...].
[E-mail...]
Opens the Send e-mail dialog window for defining the e-mail parameters
(see Chapter 2.5.1, page 79).
Acoustic signal
on | off (Default value: off)
If this check box is activated, an acoustic signal will be emitted in addition
to the message.
5.5.2.10.5 SEQUENCE
5.5.2.10.5.1 SEQUENCE - Overview
Dialog window: Method ▶ SEQUENCE ▶ Properties... ▶ SEQUENCE - 'Command
name'
Command for combining a sequence of individual commands into a single
command. This command is used only for the more readily comprehensi-
ble structuring of methods.
Appearance
The command has the following appearance:
Parameters
The parameters for the SEQUENCE command are configured in the fol-
lowing dialog window:
￭ SEQUENCE
Command variables
The following command variables are generated by the SEQUENCE com-
mand in the method run and can be used in formulas under the designa-
tion 'Command name.Variable identification':