Metrohm viva 1.1 (ProLab) - Manual (Page 678)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
666 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Jump to a new, empty standard, at which time the column number is
increased by +1. Altered data is adopted.
Option of entering the desired column number to which the program
jumps directly when [Enter] is pressed.
Buttons
[Close]
With this button, the data modified in the dialog window for the dis-
played standard solution is not adopted and the dialog window is closed.
[OK]
With this button, the data modified in the dialog window for the dis-
played standard solution is adopted and the dialog window is closed.
5.6.5 Evaluation - Calibration
5.6.5.1 Calibration - Overview
Subwindow section: Method ▶ Evaluation - Calibration ▶
Application
The way that the sample content for the substances is determined from
the peak data is defined in the Evaluation - Calibration section of the
evaluation. Only one calibration method can be selected for each method;
this calibration method is then valid for all available VA measuring com-
mands.
Tabs
￭ General
￭ Calibration curves
5.6.5.2 Calibration - General
Tab: Method ▶ Evaluation - Calibration ▶ General
This tab contains the basic settings for the calibration.
Calibration method
Selection of the method with which calibration is to take place.
Selection no calibration | MLAT | DT | RC | LAT
Default value no calibration