Metrohm viva 1.1 (ProLab) - Manual (Page 1045)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 Support
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 1033
The Edit line - Sample table 'New sample table' dialog window
opens.
10 Select the Method from the required method group, enter the sam-
ple data and click on [Apply].
The sample data entered is applied to the respective line in the sam-
ple table.
11 Repeat step 8 for each required determination.
12 Close the Edit line - Sample table 'New sample table' dialog
window with [Close].
13 Click on the [Sample table] ▶ Save as... menu item in the Sample
table 'Name' dialog window.
The Save sample table dialog window opens.
14 Enter a new name for the sample table or overwrite the existing
name in the Name field.
15 Click on [Save].
The edited sample table is saved.
9.1.7.3 Loading a working sample table
How to proceed?
1 Select the Workplace program part.
2 Click on the Determination series tab in the Run subwindow.
3 Click on the [Sample table] ▶ Load... menu item.
The Load sample table dialog window opens.
4 Select the desired sample table.
5 Click on [Load].
The data of the selected sample table is loaded into the working
sample table.