Metrohm viva 1.1 (ProLab) - Manual (Page 437)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 425
Track name
Selection of the VA track to be called up. All of the VA tracks available in
the method are displayed.
Selection 'Track name' | 'empty'
Default value 'empty'
Condition
on | off (Default value: off)
Expression for the condition(s) that can be created or edited with the for-
mula editor after clicking on or by double-clicking in the text field (see
Chapter 2.3, page 21).
If this check box is activated, then the call is carried out only if the evalua-
tion of the condition yields the result 1 (= true).
Entry 1,000 characters
Default value 'empty'
5.5.2.3 Automation commands
5.5.2.3.1 Automation commands - Overview
Menu item: Method ▶ Insert ▶ New command... ▶ Automation
Commands for the operation of sample changers.
The following automation commands can be selected:
￭ MOVE
Moves to a rack position or an external position.
￭ SWING
Swings the robotic arm (only with Swing Head).
￭ LIFT
Moves to a lift position.
￭ PUMP
Activates/deactivates the connected pumps.
￭ STIR
Controls a connected stirrer.
￭ RACK
Initializing the rack attached.
￭ HEATER
Control of the heater of the 089 Photometer.
￭ RLS DEV
Releasing an instrument for use in other methods that run in parallel.