Metrohm viva 1.1 (ProLab) - Manual (Page 593)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 581
[Properties]
Opens the Sample data variable - 'Name' dialog window, where the
sample data variable selected in the table can be edited (see Chapter
5.5.2.9.2.5, page 581).
[Delete]
Deletes the sample data variable selected in the table.
5.5.2.9.2.5 START - Sample data variables (properties)
Dialog window: Method ▶ START ▶ Properties... ▶ START - 'Command
name' ▶ Sample data variables ▶ [Properties...] ▶ Sample data variable - 'Name'
Definition of the sample data variables
Name
Freely definable name for the sample data variable, which has to be
unique within the method.
Entry 50 characters
Type
Selection of the variable type (only editable for the variables ID1 - ID16 or
for variables with fixed value assignment).
Selection Text | Number | Date/Time
Default value Text
Assignment
on | off (Default value: on)
If this check box is activated, then one of the preset sample data variables
that is to be given a freely selectable name can be selected. Only those
sample data variables which have not already been assigned are available.
No formulas can be entered in this field. The selected sample data variable
can only be displayed in the database's determination overview via this
assignment.
Selection Sample type | Sample position | Sample
amount | Sample size unit | Analytical volume |
Dilution volume | ID1 - ID16
NOTE
The sample data variables Analytical volume and Dilution volume
must both be either present (sample dilution) or absent (no sample dilu-
tion) as variables in the START command.