Metrohm viva 1.1 (ProLab) - Manual (Page 822)

6.8 Colorimetric sensors subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
810 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
breach of these limits does not trigger any action. The limits set on the
Limit values tab apply for the monitoring during the calibration.
Warning limits for coefficient of determination
on | off (Default value: off)
If this option is enabled, then the values for the coefficient of determina-
tion are displayed in orange if these limits are breached.
Lower limit
Lower warning limit for the coefficient of determination.
Input range 0.00000 - 1.00000
Default value 0.98000
Upper limit
Upper warning limit for the coefficient of determination.
Input range 0.00000 - 1.00000
Default value 1.00000
Intervention limits for coefficient of determination
on | off (Default value: off)
If this option is enabled, then the values for the coefficient of determina-
tion are displayed in red if these limits are breached.
Lower limit
Lower intervention limit for the coefficient of determination.
Input range 0.00000 - 1.00000
Default value 0.96000
Upper limit
Upper intervention limit for the coefficient of determination.
Input range 0.00000 - 1.00000
Default value 1.00000