Metrohm viva 1.1 (ProLab) - Manual (Page 39)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
2 General program functions
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 27
2.3.3.2 Sample data variables
Dialog window: Formula editor ▶ Variables
Sample data variables are method-specific and are defined in the meth-
od's START command. The data type (Text, Number, Date/Time) of
the variables is defined there. Either sample data variables (e.g., Sample
amount, Sample size unit, Sample position, ID1 - ID16) or fixed val-
ues can be assigned to these variables. The Variables field of the formula
editor lists all the Sample data variables that are available for the cur-
rent method.
Syntax
'SD.Variable name.Variable identification'
Examples: 'SD.TestDate', 'SD.RemainingTime.VAL', 'SD.Test-
Value.OVF'
The sample data variables can be selected directly in the formula editor
under Variables
▶ Sample data variables so as to avoid syntax errors.
Sample data variables
Identifica-
tion Description Data type
VAL Value of the sample data variable (optional, i.e., 'SD.Factor' = SD.Factor.VAL')
(Text, Number or Date/Time) Text, Number
or Date/Time
OVF Exceeding limits for sample data variable (Number: 1 = limit exceeded, 0 =
limit not exceeded) Number
In the following lines you will find the sample data variables present in the default settings which appear in the Work-
place and which can be edited and deleted in the START command of the corresponding method.
ID1 Value of ID1 Text, Number
or Date/Time
ID1.OVF Exceeding limit for ID1 Number
ID2 Value of ID2 Text, Number
or Date/Time
ID2.OVF Exceeding limit for ID2 Number
ID3 Value of ID3 Text, Number
or Date/Time
ID3.OVF Exceeding limit for ID3 Number
Sample type Value of Sample type Text
Sample
type.OVF Exceeding limit for Sample type Number
Sample posi-
tion Value of Sample position Number