Metrohm viva 1.1 (ProLab) - Manual (Page 672)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
660 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Option of entering the desired line number to which the program jumps
when [Enter] is pressed.
Buttons
[Close]
With this button, the data modified in the dialog window for the dis-
played substance is not adopted and the dialog window is closed.
[OK]
With this button, the data modified in the dialog window for the dis-
played substance is adopted and the dialog window is closed.
5.6.3.4 Substances - Baselines
Tab: Method ▶ Evaluation ▶ Substances ▶ Baselines
NOTE
The Baselines tab is disabled in the CP command, because there is no
peak evaluation for the CP command.
Table
The table on the Baselines tab contains an overview of the parameters
that define the evaluation with the help of baselines of the peaks/steps
that are assigned to the substances. The table cannot be edited directly
and contains the following columns:
Substance
Name of the substance.
Baseline type
Shows the baseline type with which the evaluation takes place.
Start base point
Shows the start base point at which the baseline begins.
End base point
Shows the end base point at which the baseline ends.
Modifies the sequence of shown substances by moving the selected line
upward.