Metrohm viva 1.1 (ProLab) - Manual (Page 572)

5.5 Method run subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
560 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
NOTE
The run time is also interrupted if the method is stopped with [HOLD].
Condition
on | off (Default value: off)
Check box for activation/deactivation of the stop criterion Condition.
Expression for the condition(s) that can be created or edited with the for-
mula editor after pressing on or by double-clicking in the text field
(see Chapter 2.3, page 21).
The condition is checked continuously; if it is fulfilled, (evaluation of the
formula supplies the result 1 = true), then the command will be canceled.
Entry 1,000 characters
Default value 'empty'
5.5.2.8.4 ANALOG OUT
5.5.2.8.4.1 ANALOG OUT - Overview
Dialog window: Method ▶ ANALOG OUT ▶ Properties... ▶ ANALOG OUT - 'Com-
mand name'
Instruments
This command can be executed with the IO controller.
Appearance
The command has the following appearance:
Mode of operation
The values that are written on the analog outputs can be either calcula-
tion results or fixed values.
The values, the default values and the unit of all of the analog outputs
used in the command are saved in command variables.
Parameters
The parameters for the ANALOG OUT command are set on the following
tabs:
￭ General