Metrohm viva 1.1 (ProLab) - Manual (Page 627)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 615
Identification Description
HGT.RSD Relative standard deviation of the peak heights of all
replications
HGT.MNVDE
LTA Difference between the mean value of the peak
heights of all replications for measurement {x} and
the mean value of the peak heights of all replications
for measurement {x-1}
Result variables per variation
Designation 'RS.'Command name'.VAR{x}.Variable identification'
Identification Description
VTOT Total volume in the measuring vessel for variation {x}
5.5.2.11.2.2 CVS - General/Hardware
Tab: Method ▶ CVS ▶ Properties... ▶ General/Hardware
Command name
Name of the command.
Entry 25 characters
Device
Device name
Selection of a device from those available in the device table. Only devices
with which the command can be executed are available.
Selection 'Device name' | not defined
Default value not defined
not defined
In this case, the device name must be assigned by the user at the start
of the method.
Device type
Display or selection of the instrument type. If an instrument is selected in
the Device name field, the Device type field can no longer be edited
and the instrument type belonging to the instrument is displayed.
If the not defined option is selected in the Device name field, all instru-
ment types or groups with which the command can be executed can be
selected, regardless of the instruments present in the device table.
Selection 894 Professional CVS
Default value 894 Professional CVS