Metrohm viva 1.1 (ProLab) - Manual (Page 683)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 671
Jump to the previous substance. Altered data is adopted.
Jump to the next substance (in the case of the last substance, jump to a
new, empty substance). Altered data is adopted.
Jump to the last substance. Altered data is adopted.
Option of entering the desired line number to which the program jumps
when [Enter] is pressed.
Buttons
[OK]
With this button, the data modified in the dialog window for the dis-
played substance is adopted and the dialog window is closed.
[Close]
With this button, the data modified in the dialog window for the dis-
played substance is not adopted and the dialog window is closed.
5.6.5.5 DT calibration curve properties
Dialog window: Method ▶ Evaluation - Calibration ▶ Calibration
curves ▶ [Edit] ▶ Properties... ▶ Properties calibration
The calibration curve parameters for the substance selected in the table
can be edited in the Properties calibration dialog window.
Measuring command
Shows the selected measuring command.
Substance
Shows the selected substance.
Evaluation quantity
Selection of the quantity according to which the substance is to be evalu-
ated.
Selection Area | Height
Default value Area
Evaluation ratio
Evaluation ratio Q/Q(0) with which the calibration factor is calculated.