Metrohm viva 1.1 (ProLab) - Manual (Page 615)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 603
5.5.2.10.4.2 WAIT - Properties
Dialog window: Method ▶ WAIT ▶ Properties... ▶ WAIT - 'Command name'
Command name
Name of the command.
Entry 25 characters
Wait
Selection of the following options:
Selection Stop track and waiting for [Continue] | Stop
all tracks and waiting for [Continue] | Waiting
time
Default value Stop track and waiting for [Continue]
Stop track and waiting for [Continue]
If this option is selected, then the track in which the WAIT command
is located is stopped and a message is displayed. The method run can
be continued only by pressing [Continue].
Stop all tracks and waiting for [Continue]
If this option is selected, then all active tracks are stopped and a mes-
sage is displayed. The method run can be continued only by pressing
[Continue].
Waiting time
If this option is selected, then the method run will be continued auto-
matically after the waiting time expires. The message text defined
under Message appears during the waiting time.
Waiting time
This parameter can be edited only if Wait = Waiting time.
Input range 0 - 9,999.9
Default value 0
Selection s | min
Default value s
Message
The message defined here is displayed with tracks stopped or during the
waiting time. The text editor for entering or changing the message is
opened with or by double-clicking on the text field (see Chapter
2.4.2, page 78). The formula editor can also be opened within the text
field (see Chapter 2.3, page 21).
Entry Text (unlimited)