Metrohm viva 1.1 (ProLab) - Manual (Page 397)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 385
￭ Communication
CTRL
RECEIVE
SCAN
SEND
TRANSFER
￭ Miscellaneous
LOOP
REQUEST
SEQUENCE
WAIT
￭ Process analysis
ANALOG IN
ANALOG OUT
CONTROL
DIGITAL IN
DIGITAL OUT
PORT
STEPPING MOTOR
The new command is inserted above the selected command after confirm-
ing the selection with [OK].
5.2.4.2.2 Selecting a command
Subwindow: Method
A command is selected with a left mouse click. The selected command is
enframed by a double-width line. Further commands within the same
track can be added to or removed from the selection with the left mouse
button while the Ctrl key is held down.
Non-selected command Selected command
5.2.4.2.3 Moving a command
Subwindow: Method
Moving commands with drag and drop
To move commands with drag and drop they have to be selected first.
They can then be moved to the desired position between two commands
with the left mouse button held down. A red arrow indicates the possible
positions.