Metrohm viva 1.1 (ProLab) - Manual (Page 447)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 435
Selection 814 USB Sample Processor | 815 Robotic USB
Sample Processor XL | 858.0010 Professional
Sample Processor | 858.0020 Professional
Sample Processor | 858.0030 Professional
Sample Processor | 919.0020 IC Autosampler
plus
Default value 858.0020 Professional Sample Processor
Target
Tower
Selection of the tower on the sample changer for moving to the required
lift position.
Selection 1 | 2
Default value 1
Lift position
Entering the desired lift position in mm or selection of one of the lift posi-
tions predefined for the rack. A lift height of 0 mm corresponds to Home
position. Here the lift is moved to the uppermost stop.
Input range 0 - 235 mm
Selection Work position | Shift position | Rinse position |
Special position | Home position
Default value Work position
NOTE
Please take care that no lift positions exceed the maximum stroke path
specified in the tower properties of the instrument.
Parameters
Lift rate
Selection of the speed for moving the lift.
Input range 5 - 25 mm/s
Default value 25 mm/s