Metrohm viva 1.1 (ProLab) - Manual (Page 734)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
722 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Variable Description
VTOT(VMS,
Cal) Total volume in the measuring vessel at the moment of
the measurement of the VMS by calling the measuring
command via the command CALL VMS at the moment
of calibration.
5.6.7.7.14 Relative standard deviation of the calibration factor DT
Variable name RS.’Command name’.’Substance name’.CALFACT.RSD
Description Relative standard deviation of the calibration factor DT.
Decimal places 0…1…6
Unit %
Remark Only for Calibration method = DT and Sample type = Standard.
5.6.7.7.15 Concentration of the substance in the measuring vessel
Variable name RS.’Command name’.’Substance name’.CONCM
Description Substance concentration in the measuring vessel.
Decimal places 0 - 2 - 6
Unit g/L, L/L or mol/L (depending on the unit of the standard)
Remark For all calibration methods except DT.
5.6.7.7.16 Unit of the substance concentration in the measuring vessel
Variable name RS.’Command name’.’Substance name’.CONCM.UNI
Description Unit of the substance concentration in the measuring vessel.
Decimal places 0 - 2 - 6
Unit g/L, L/L or mol/L (depending on the unit of the standard)
Remark For all calibration methods except DT.
5.6.7.7.17 Absolute standard deviation of the substance concentration in the
measuring vessel
Variable name RS.’Command name’.’Substance name’.CONCM.ASD
Description Absolute standard deviation of the substance concentration in the mea-
suring vessel.
Decimal places 0…2…6
Unit The unit corresponds to the "Unit of the substance concentration in the
measuring vessel" (see Chapter 5.6.7.7.16, page 722).
Remark For all calibration methods except DT.