Metrohm viva 1.1 (ProLab) - Manual (Page 46)

2.3 Formula editor
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
34 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Identifica-
tion Description Commands
LP.EXx External value x (1 - 3) for the last measuring point on the measuring point list MEAS Opt,
MEAS Opt
Conc
LP.MEA Measured value for the last measuring point in the measuring point list in the unit
of the measured value CAL MEAS
Opt, MEAS
Opt, MEAS
Opt Conc,
MEAS TMF
LP.TEM Temperature for the last measuring point in the measuring point list in °C CAL MEAS
Opt, MEAS
Opt, MEAS
Opt Conc,
MEAS TMF
LP.TIM Time in s until the last measuring point in the measuring point list is reached CAL MEAS
Opt, MEAS
Opt, MEAS
Opt Conc,
MEAS TMF
LP.TRN Transmission of the last measuring point in the measuring point list in % CAL MEAS
Opt, MEAS
Opt, MEAS
Opt Conc
LPO Current absolute lift position in mm (entry when ending the command) LIFT
LST Start time of the loop command (Date/Time) CALL COND
CAL LOOP
Opt, LOOP
MA.CNT Intensity for maximum measured value in counts MEAS Opt
MA.MEA Maximum measured value in the unit of the measured value MEAS Opt
MA.TEM Temperature for the maximum measured value in °C MEAS Opt
MA.TIM Time in s until the maximum measured value is reached MEAS Opt
MA.TRN Transmission for maximum measured value in % MEAS Opt
MI.CNT Intensity for minimum measured value in counts MEAS Opt
MI.MEA Minimum measured value in the unit of the measured value MEAS Opt
MI.TEM Temperature at minimum measured value in °C MEAS Opt
MI.TIM Time for the minimum measured value in s MEAS Opt
MI.TRN Transmission for minimum measured value in % MEAS Opt