Metrohm viva 1.1 (ProLab) - Manual (Page 1023)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
9 Support
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 1011
7 Click on [OK] in the Reprocessing dialog window.
Each determination that has been modified by reprocessing will be
saved as a new version with a version number increased by +1 and
the Reprocessing dialog window will be closed. This button is disa-
bled for as long as recalculation has not yet been triggered and if not
all the selected determinations were able to be recalculated.
Modifying a method
NOTE
The method can only be modified if it is identical for all selected deter-
minations.
1 Change to the Method tab.
2 Click on [Modify method].
The Method editor dialog window opens.
3 Modify the method as desired.
Parameters of existing commands can be modified.
4 Click on [OK].
5 Click on [Recalculate].
The selected determinations are recalculated. The results of this recal-
culation are automatically entered in the Result view subwindow.
6 If desired, save the modified method with [Save as...] under the
same name or under a new name.
If the modified method is saved under the name of an existing
method, then all earlier method versions will be deleted and a new
version with the number 1 will be generated.
7 Click on [OK] in the Reprocessing dialog window.
Each determination that has been modified by reprocessing will be
saved as a new version with a version number increased by +1 and