Metrohm viva 1.1 (ProLab) - Manual (Page 355)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
4 Database
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 343
Base line
on | off (Default value: on)
If this check box is activated, then the baseline and base points are shown
(only for smoothed curves) and the color of the baseline can be selected.
This parameter can be edited only for Quantity = Current [A].
Selection red | 13 colors
Default value red
Line thickness
Line thickness of baselines.
Input range 1 - 10 pixels
Default value 1 pixels
4.6.2.2.3 Curve properties VA measuring command - y2 Axis
Tab: Workplace / Database ▶ Curves # ▶ Properties Curves # ▶ y2 Axis
Parameters for the graphical display of the overlaid curves on the y2 axis
(right-hand y axis).
Quantity
Selection of the quantity to be shown on the y2 axis.
CVS
Selection
Current [A] | Potential [V] | Time [s] | Current
measuring range [A] | off
Default value off
CPVS
Selection
Current [A] | Potential [V] | Time [s] | Current
measuring range [A] | off
Default value off
CP
Selection
Current [A] | Potential [V] | Time [s] | Potential
measuring range [V] | off
Default value off
Label
Freely definable axis label for the y2 axis. If auto is selected, then the des-
ignation from the Quantity field will be used.
Selection 50 characters | auto
Default value auto