Metrohm viva 1.1 (ProLab) - Manual (Page 182)

3.9 Curves subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
170 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Rep
Replication number.
Area / Height
Peak areas or peak heights of all replications of a CALL COND command
(see Chapter 5.5.2.2.6.2, page 419).
Area RSD / Height RSD
Relative standard deviation of the peak areas / peak heights of the last
two runs of a CALL COND command (see Chapter 5.5.2.2.6.2, page
419).
Display
on | off (Default value: on)
Indicates whether a measurement curve is displayed in the curve window
or not.
The parameters Area or Height and Relative standard deviation of the area
or height are only displayed in the table if the method contains the CALL
COND command and the Evaluation quantity stop criterion is acti-
vated.
Context-sensitive menu items for table
The table cannot be edited directly but only via the following context-sen-
sitive menu items:
On The check box in the Display column for the selected measurement curve is
activated.
Off The check box in the Display column for the selected measurement curve is
deactivated.
All on All check boxes in the Display column are activated.
All off All check boxes in the Display column are deactivated.
Save selection The settings in the Display column for the selected measurement curves are
saved.
Buttons
Selection on
The marking of the curves selected in the table is activated.
Selection off
The marking of the curves selected in the table is deactivated.