Metrohm viva 1.1 (ProLab) - Manual (Page 186)

3.9 Curves subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
174 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
Selection CVS | CPVS | CP | MEAS Ref | MEAS Spec |
MEAS Opt | CAL Spec | MEAS TMF | MEAS T
Default value CVS
NOTE
When the dialog window is opened, the Command type that applies
for the curve shown in the curve window will be selected by default.
3.9.2.2 Curve properties VA measuring command
3.9.2.2.1 Curve properties VA measuring command - x Axis
Tab: Workplace / Database ▶ Curves # ▶ Properties Curves # ▶ x Axis
Parameters for the graphical display of the curves on the x axis.
Quantity
Selection of the quantity to be shown on the x axis.
CVS
Selection
Current [A] | Potential [V] | Time [s] | Current
measuring range [A]
Default value Potential [V]
CPVS
Selection
Current [A] | Potential [V] | Time [s] | Current
measuring range [A]
Default value Time [s]
CP
Selection
Current [A] | Potential [V] | Time [s] | Potential
measuring range [V]
Default value Time [s]
Label
Freely definable axis label for the x axis. If auto is selected, then the desig-
nation from the Quantity field will be used.
Selection 50 characters | auto
Default value auto
Numerical format
Selection of the numerical format for the labeling of the x axis.
Selection decimal | scientific | engineering
Default value engineering