Metrohm viva 1.1 (ProLab) - Manual (Page 904)

7.7 089 Photometer
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
892 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
7.7.4 Properties - Adjustment
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ Adjustment
Transmission factor
Transmission factor, either determined with MEAS TMF or manually
entered here.
Input range 0.0100 - 20.0000
Default value 1.0000
Date
Shows the time and date when the transmission factor was determined.
User
Shows the user logged in during the determination of the transmission
factor.
Method
Shows the method used to determine the transmission factor. If the trans-
mission factor was entered manually, manual is displayed.
Determination ID
ID of the determination during which the transmission factor was deter-
mined.
7.7.5 Properties - MSB #
Tab: Configuration ▶ Devices ▶ [Edit] ▶ Properties... ▶ Properties - 'Device type' -
'Device name' ▶ MSB #
The MSB # tabs show the properties of the MSB connector and the devi-
ces connected to it.
Request for dosing device preparation
Selects when to display the request to execute the PREP command (see
Chapter 5.5.2.4.7.1, page 467) (prepare) for the dosing device connected
to the MSB.
At program start
on | off (Default value: on)
If this check box is activated, then the request to prepare the dosing
device is displayed every time the program is started.