Metrohm viva 1.1 (ProLab) - Manual (Page 666)

5.6 Evaluation subwindow
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
654 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
CP/CPVS
Input range
0.000 - 3,600.000 s (Increment: 0.001)
Selection Last measuring point
Default value Last measuring point
Unit
Unit of the measured quantity (or the independent variable).
Sweep direction
Selection of the cyclic voltammogram's sweep direction, whose associated
measuring points are to be used for the determination of the fixed value.
This parameter is displayed only for the CVS command.
Selection anodic | cathodic
Default value anodic
Navigation
Shows the currently selected number of the fixed point F {z} in the table
Parameters for fixed point evaluation with the following functions:
Jump to the first line in the table.
Jump to the previous line in the table.
Option of entering the desired line number to which the program jumps
when [Enter] is pressed.
Jump to the next line in the table. If the end of the table has been
reached, then a new line will be inserted automatically and the program
will jump to it.
The same function can also be triggered by pressing the [Enter] key.
Jump to the last line in the table.
Jump to a new, empty line.