Metrohm viva 1.1 (ProLab) - Manual (Page 290)

4.5 Determination overview
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
278 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
4.5.2.4 Filtering determinations
4.5.2.4.1 Filtering determinations - Overview
Subwindow: Database ▶ Determination overview
The following possibilities exist for filtering determinations in the determi-
nation table:
￭ Filter selection in the filter bar
￭ Last filter
￭ Quick filter
￭ Special filter
￭ Remove filter
4.5.2.4.2 Determinations - Last filter
Menu item: Database ▶ Determinations ▶ Filter ▶ Last filter
The most recently applied filter is reactivated with the Determina-
tions
▶ Filter ▶ Last filter menu item or with the icon.
4.5.2.4.3 Determinations - Quick filter
Menu item: Database ▶ Determinations ▶ Filter ▶ Quick filter
A rapid filtration can be carried out in accordance with the content of the
selected table field using the Determinations
▶ Filter ▶ Quick filter
menu item or the icon. After this function has been selected, the field
in the determination table in which the cursor is located will have a col-
ored background during navigation. At the same time, the following spe-
cial filter icon appears:
Double-clicking with the left mouse button on the field selected in the
table will cause its contents to be set as the filter criterion, and this filter
will be applied directly to the table.
NOTE
The quick filter can be applied again within the filtered table, so that
the number of entries can be limited step by step.