Metrohm viva 1.1 (ProLab) - Manual (Page 643)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
5 Method
viva 1.1 (for process analysis)
￭￭￭￭￭￭￭￭ 631
Result variables if called by CALL VA
The following result variables are generated in the method run when a
CPVS command is called by CALL VA and can be used in formulas:
Result variables per substance, variation and replication
Designation 'RS.'Command name'.'Substance
name'.VAR{x}.REP{y}.Variable identification'
Identification Description
SUBST Substance name
POT Stripping potential
AREA Peak area
HGT Peak height
START Start base point, where the peak evaluation baseline
begins
END End base point, where the peak evaluation baseline
ends
AREANORM Standardized peak area (AREA/AREA.MNV).
AREA.MNV = VMS.AREA.MNV 1 or ELECTRO-
LYTE.AREA.MNV 2 (only one of these two variables
may be present in a determination)
HGTNORM Standardized peak height (HGT/HGT.MNV).
HGT.MNV = VMS.HGT.MNV 1 or ELECTRO-
LYTE.HGT.MNV 2 (only one of these two variables
may be present in a determination)
1 for calibration method DT
2 for calibration method RC
Result variables per substance and variation
Designation 'RS.'Command name'.'Substance name'.VAR{x}.Varia-
ble identification'
Identification Description
AREA.MNV Mean value of the peak areas of all replications
AREA.ASD Absolute standard deviation of the peak areas of all
replications
AREA.RSD Relative standard deviation of the peak areas of all
replications