Metrohm viva 1.1 (ProLab) - Manual (Page 876)

7.4 919 IC Autosampler plus
￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
864 ￭￭￭￭￭￭￭￭
viva 1.1 (for process analysis)
815 Robotic USB Sample Processor XL
Input range
100.0 - 300.0 mm
Default value 196.0 mm
919 IC Autosampler plus
Input range
100.0 - 300.0 mm
Default value 189.0 mm
Swing Head
This parameter is only shown only if a Swing Head is mounted on the
tower.
Serial number
Shows the serial number of the Swing Head.
Swing position
Lift position that is valid for all four external positions and at which the
robotic arm turns to the external positions.
Input range 0 - 235 mm
Default value 0 mm
Rinse position
Rinse position that is valid for all four external positions and which can be
approached with the LIFT command.
Input range 0 - 235 mm
Default value 0 mm
[Configuration]
Opens the Robotic arm configuration dialog window (see Chapter
7.3.8, page 859), in which the properties of the robotic arm can be
edited.
Table for external positions
The properties for the four possible external positions for the robotic arm
mounted on the Swing Head are shown in the table. The table cannot be
edited directly.
External position
Number of the external position.
Angle [°]
Swing angle for external position.