Motorola MPC8260 - Manual (Page 308)

10-32 MPC8260 PowerQUICC II UserÕs Manual MOTOROLA
Part III. The Hardware Interface
10.3.11 Local Bus-Assigned SDRAM Refresh Timer (LSRT)
The local bus-assigned SDRAM refresh timer register (LSRT) is shown in Figure 10-17.
Table 10-15 describes LSRT Þelds.
10.3.12 Memory Refresh Timer Prescaler Register (MPTPR)
Figure 10-18 shows the memory refresh timer prescaler register (MPTPR).
Table 10-16 describes MPTPR Þelds.
Bit 0 1 2 3 4 5 6 7
Field LSRT
Reset 0000_0000
R/W R/W
Addr 0x101A4
Figure 10-17. Local Bus-Assigned SDRAM Refresh Timer (LSRT)
Table 10-15. LSRT Field Descriptions
Bits Name Description
0Ð7 LSRT Refresh timer period. Determines the timer period according to the following equation:
This timer generates refresh requests for all valid banks that selected a SDRAM machine assigned
to the local bus and is refresh enabled (LSDMR[RFEN] = 1). Each time the timer expires, all banks
that qualify generate a bank staggering auto refresh request using the SDRAM machine. See
Section 10.4.10, ÒSDRAM Refresh.Ó
Example: For a 25-MHz system clock and a required service rate of 15.6 µs, given
MPTPR[PTP] = 32, the LSRT value should be 12 (decimal). 12/(25 MHz/32) = 15.36 µs, which is less
than the required service period of 15.6 µs.
Bit 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Field PTP Ñ
Reset 0000_001x 0000_0000
R/W R/W
Addr 0x10184
Figure 10-18. Memory Refresh Timer Prescaler Register (MPTPR)
Table 10-16. MPTPR Field Descriptions
Bits Name Description
0Ð7 PTP Refresh timers prescaler. Determines the period of the memory refresh timers input clock. It divides
the system clock.
8Р15 С Reserved, should be cleared
TimerPeriod
LSRT
F
MPTC
----------------- и ш
ж ц
=