Basler Electric DGC-2020 - Manual (Page 8)

Manual
Revision and Date
Change
G, 11/07 •
Added Section 8, LSM-2020 (Load Share Module).
•
Updated HMI screens layout in Section 2.
•
Added BESTCOMSPlus Multigen Management screens.
F, 08/07 •
Updated manual to support firmware package 1.02.00 changes and
BESTCOMSPlus version 1.03.00 changes. (See firmware package
and BESTCOMSPlus revision history below for details.)
E, 05/07 •
Added description of Clock Setup screen in BESTCOMSPlus.
•
Updated several BESTCOMSPlus screen shots.
•
Increased Low Coolant Temp Pre-Alarm range to 30 - 150
°F.
D, 03/07 •
Removed International Modem option from Style Chart in Section 1.
•
Added coverage of part numbers 9400200105 and 9400200106.
C, 02/07 •
Added Event Recording in Section 3, Functional Description.
•
Minor text edits throughout manual.
B, 11/06 •
Initial release
BESTCOMSPlus®
Version and Date
Change
3.07.00, 10/14 •
Updated to support firmware package 1.19.00 (see firmware package
version history).
•
Added Load Share and Control Diagnostics screens.
•
Changed to allow the Metering Status screen to open before a
connection is made.
•
Removed duplicate results in the device discovery list.
•
Improvements to device directory on Connection screen.
•
Changed how the LSM-2020 model number is reported on the Device
Info screen.
•
Changed to allow a comma in the Device ID.
•
Changed to annunciate a connection failure message when a device is
not present on a selected port.
•
Improved prompts to save settings when choosing to close all open
views.
•
Changed to hide security settings for the LSM-2020 when opening a
settings file.
•
Changed to allow the middle mouse button to close the security view.
•
Improved display of raw analog input currents.
•
Changed to make BESTlogicPlus status LEDs report all logic errors.
3.06.00, 04/14 •
Maintenance release (BE1-11 changes)
3.05.03, 03/14 •
Maintenance release (DECS-250N changes)
3.05.02, 01/14
•
Updated to support firmware package 1.18.00 (see firmware package
version history).
3.04.01. 10/13
•
Maintenance release (BE1-11 changes)
3.04.00, 08/13 •
Maintenance release (BE1-11 changes)
3.03.03, 06/13 •
Maintenance release (BE1-11 changes)
3.03.00, 03/13
•
Updated to support firmware package 1.17.02 (see firmware package
version history).
•
Added breaker hardware settings.
•
Added new mains fail transfer screen.
vi DGC-2020 Introduction 9400200990 Rev X