Basler Electric DGC-2020 - Manual (Page 203)

Figure 4-76. BESTCOMSPlus Settings Compare Setup
Figure 4-77. BESTCOMSPlus Settings Compare
Upgrading Firmware in the DGC-2020 and Expansion Modules
NOTE
The latest version of BESTCOMSPlus software should be downloaded from
the Basler Electric website and installed before performing a firmware
upgrade.
A device package contains firmware and a language module. Embedded firmware is the operating
program that controls the actions of the DGC-2020. The DGC-2020 stores firmware in nonvolatile flash
memory that can be reprogrammed through the communication ports. It is not necessary to replace
EPROM chips when updating the firmware with a newer version.
Future enhancements to the DGC-2020 functionality will make a firmware update desirable. Because
default settings are loaded when DGC-2020 firmware is updated, your settings should be saved in a file
prior to upgrading firmware.
9400200990 Rev X DGC-2020 BESTCOMSPlus
® Software
4-93