Basler Electric DGC-2020 - Manual (Page 333)

Figure 7-51. Settings Explorer, BESTlogicPlus Programmable Logic (Step 13)
14. If using the LSM-2020 to bias the voltage regulator and governor, no further setup is necessary. If
using contact outputs, the output contacts should be set up to drive these functions. In the
programmable logic, click on the Elements tab. Locate and drag the Governor and AVR logic blocks
into the main logic. See Figure 7-52.
Figure 7-52. Settings Explorer, BESTlogicPlus Programmable Logic (Step 14)
9400200990 Rev X DGC-2020 Setup 7-45