Basler Electric DGC-2020 - Manual (Page 210)

Figure 4-85. Metering, Bias Control
Run Statistics
This screen provides Cumulative Run Statistics, Session Run Statistics, and Commission Date. Refer to
Figure 4-86.
The Hours Until Maintenance pre-alarm is configured on the Pre-Alarms screen in the Settings Explorer.
The Hours Until Maintenance field will display “OFF” when the Maintenance Interval pre-alarm is disabled.
Clicking Reset Maintenance Interval resets the Hours Until Maintenance to the value set for the
Maintenance Interval pre-alarm on the Pre-Alarms screen in the Settings Explorer.
To change the commission date, click Edit DGC Commission Date. The DGC Commission Date dialog
box appears. Enter the new commission date and click Upload Data to Device. Click Close. Note that the
Commission Date field on the BESTCOMSPlus screen updates after the Close button is clicked.
Figure 4-86. Metering, Run Statistics
Status
This screen indicates status of breakers, modes, switches, and I/O connection status. The status is TRUE
when the corresponding LED is red. Refer to Figure 4-87.
4-100 DGC-2020 BESTCOMSPlus
® Software
9400200990 Rev X